|
Surfaces - Horizontal & Vertical
|
|
|
Matte
|
Polish
|
|
Most Dirt
|
Use soap, water or an ammonia-based cleaner
|
|
Water Marks
|
Wipe with damp cloth; towel dry
|
|
Disinfecting
|
Occasionally wipe surface with diluted household bleach (1/1 water and bleach)
|
|
Difficult Stains
|
Use an abrasive cleanser and a green Scotch-Brite* pad.
|
Follow procedure for stain, but use a sponge instead of a Scotch-Brite pad or use white polishing compound.
|
|
Maintenance
|
Rub with Scotch-Brite pad alone.
|
Clean with glass cleaner.
|
|
Sinks
|
|
|
Matte
|
POLISH
|
|
Cleaning
|
Same as above.
|
|
Disinfecting
|
Same as above.
|
|
Maintenance
|
Occasionally clean by filling the sink 1/4 full with a 50/50 water/bleach solution. Let soak for 15 minutes, then wash sides and bottom as solution drains.
|
|
Removing Cuts & Scratches
|
|
|
MATTE
|
POLISH
|
|
|
Sand with 180 or 220 grit sandpaper until the cut is removed.
Restore finish with an abrasive cleanser and a green Scotch-Brite pad
|
Sand with 400 grit sandpaper. Wipe the surface and continue with 600 grit sandpaper.
Buff with white polishing compound and a low speed (1500 - 2000 rpm) polisher equipped with a wool pad. Finish with a countertop wax.
|
|
Note: Please consult SolidSurface Designs for specific recommended care and use practices and care products to use.
|